• Homepage>>access control system
    New productsProducts series
    M-218E single ray Sensor

    Current: 45mA Quiescent 86mA output capacity of action: Contact 1A 24VDC
    Power supply: AC-DC AC / DC 12-36        contact output states:NO.  NC   Cable:(single)5.5m long
    safety eye:19(L)*13(Diameter)mm      Control deive size:123(L)*50(W)*32(H)mm

    M-218E single ray Sensor
    M-218E single ray Sensor
    • CAD diagram
    • Diagram1CADdownload
    • Manual book
    • M-218E single ray SensorPDFdownload
    • Manual book
    • M-218E single ray SensorPDFdownload
    Detailed Products

    Safety beam sensor widely used on automatic door for anti-pinch (human body or objects) auxiliary functions :reliably and accurately detected human body or objects through the automatic doors to provide open signal, thus avoiding the automatic doors to hurt people and avoice risks incident.
    Current: 45mA Quiescent 86mA output capacity of action: Contact 1A 24VDC
    Power supply: AC-DC AC / DC 12-36        contact output states:NO.  NC   Cable:(single)5.5m long
    safety eye:19(L)*13(Diameter)mm      Control deive size:123(L)*50(W)*32(H)mm
    Single-beam, Double-beam  optional,  flexible choice to be closer, farhter. By pairs of emission and the main controller together,transmit distance,safety light eyes, install wiring flexibility adjust. Sensing probe sensor can  overcome the blind spot, so that make the automatic doors more safe.

    Operational Guidelines

    M-218E Sensor beam

    1.security Guide

    Thanks for purchasing this product, in order to use the product properly ,please read this operations guide before using.

    2.Panel instructions and Use Description

     

    Emission electric eye (blue wire) to receive electronic eyes (black wire)

     

    >>Select the far distance.

    >select the near distance.

    >Select double-beam optical access.

    >Select single-beam optical access.

    >Deputy head light receiving launch access.

    >Power action indicator.

    >Input power, output contacts, master Ray receive emission head access.

    >NO and NC switch output to skip dialing ht emission head access.

    3.The overall characteristic

    1.Microcomputer control technology, system integration is high, strong stability.

    2.International Universal optical lens design, focus, controlled angle is rational, easy to install on the radio.

    3.Send and receive a special code using microcomputer technology, transmitting and receiving range, anti-interference ability.

    4.From Germany to receive filtering, decoding, amplification system, effective solution to anti-interference of natural daylight.

    5.Emission head adopts low-power high pulse emission technology, transmission distance, low power consumption, long life for the camera.

    6.A single group or two groups split lens connected transceiver input, connection and good shielding Available with a beam of light, can also be a controlled double-light.

    7.Light block trigger, the output can be flexibly select normally open or normally closed contact signal.

    8.Design of wide input voltage, 12 ~ 36v AC-DC power input is valid.

    4.The definition of input and output terminals

     

    Notes: Select UV light, the light emitted must be received in the eye head 8 pieces of terminals on the main receiving and dispatching Terminal.

    5.Specific considerations

    1.Electric eye installation, holes of 13mm.

    2.UV light, it is recommended that the ground installation height:60cm.

    3.Double beam of light, a set of installation height 30 cm, another group of height 90 cm.

    4.Select UV light, the light emitted must be received in the eye head 8 spell Terminal master transceiver, otherwise it will cause the control failure.

    6.Send and receive on the magic eye, usually between the head should be careful not to put a bonsai or other piling up, so as not to cause blocking maloperation.

    7.This system has excellent resistance to natural light interference ability, but when installing you should avoid strong sunlight direct Irradiate positive electric eye head.

    8.To ensure the sensor beam Height above ground not less than 20 cm.

    6.The main technology parameters

    Supply power: AC/DC 12~36V

    Static current: 25mA

    Action current: 40mA

    The maximum distance between the sending and receiving: 10m

    NO or NC output contact: 0~1.5s (adjustable)

    Outside in lines with the send wiring: 6m(blue)

    Receive line: 6m(black)

    Beam: Single beam or double beam

    Working Environment temperature: -42 ~45 

    Working environment humidity: 10~90%RH

    Appearance dimensions(Main controller): 123(L)x50(W)x32(H)mm

    Appearance dimensions(Magic eye head): 19(L)x13(D)

    M-218E BEAM SENSOR_.._1M-218E BEAM SENSOR_.._2M-218E BEAM SENSOR_.._3