• Homepage>>access control system
    New productsProducts series
    M-219 Feet Sensor

    Response time: ≤ 45ms  relay output monitor signal: 4.5mA   Power Input :12-36V AC / DC

     

    Power consumption: 82mA    detection mode: Foot often appear, the light beams are cut eye                     Size: 149 (length) * 13 (diameter) mm

     

    Dimensions: 186 (length) * 175 (W) * 60 (D) mm                                            Main body in shape size: 118 (length) * 100 (W) * 54 (D) mm (hole)

    M-219 Feet Sensor
    M-219 Feet Sensor
    Detailed Products

    Widely used in hospital operating rooms, laboratories, and the clean room entrance automatic door sensor control, easy to operate, instead of their feet, to eliminate hand contact ,say no contamination.
    Response time: ≤ 45ms  relay output monitor signal: 4.5mA   Power Input :12-36V AC / DC
    Power consumption: 82mA    detection mode: Foot often appear, the light beams are cut eye                     Size: 149 (length) * 13 (diameter) mm
    Dimensions: 186 (length) * 175 (W) * 60 (D) mm                                            Main body in shape size: 118 (length) * 100 (W) * 54 (D) mm (hole)

    Microprocessor modulation and demodulation active active infrared. Microcomputer control, international refined brushed stainless steel exterior design. Easy installation, stable performance,stronge anti-interference  ability. Optional single group with the controller, can also choose both inside and outside a group (dual).

     

     

    Widely used in hospital operating rooms, laboratories, and the clean room entrance automatic door sensor control, easy to operate, instead of their feet, to eliminate hand contact ,say no contamination.

     

    Response time: ≤ 45ms  relay output monitor signal: 4.5mA   Power Input :12-36V AC / DC

     

    Power consumption: 82mA    detection mode: Foot often appear, the light beams are cut eye                     Size: 149 (length) * 13 (diameter) mm

     

    Dimensions: 186 (length) * 175 (W) * 60 (D) mm                                            Main body in shape size: 118 (length) * 100 (W) * 54 (D) mm (hole)

     

    Microprocessor modulation and demodulation active active infrared. Microcomputer control, international refined brushed stainless steel exterior design. Easy installation, stable performance,stronge anti-interference  ability. Optional single group with the controller, can also choose both inside and outside a group (dual).

     
     
     
     

    Operational Guidelines

    M-219    Feet Sensor Kits


    1.security Guide

    Thanks for purchasing this product, in order to use the product properly ,please read this operations guide before using.

     

    The overall characteristic

    Microcomputer control, internationalization exquisite shape design of stainless steel wire drawing.

    Concealed fixation screws on the front, small embedded fine eye for light and . easy installation, stable performance, strong anti-inter ference.

    Used in hospital operating rooms, laboratories and clean room entrance and automatic door sensor control.

    Modulation of the active microprocessor active infrared.

    Detection mode :the feet instead of the hand, beam is truncated and output a signal to open door when it is touched.

     

    Dimensions and panel layout

     

     

    Device composed

     

    1Two shielded wires(Standard 5.5 m)                   2 A master controller       

    3Pairs of laser beam pull-type cylindrical.               4Stainless steel assemblies(one or two)

    5.The terminal wiring of input and output

     

     

    Notes: When using a single group, this DIP switch must be allocated .When using dual group, this DIP switch must be on the dial. Otherwise, it will lead to not work Properly.

    Select the extended leg sensor sensitivity: Under the pull: Sensor sensitivity turn out to be weak Up the pull: 6.Sensor sensitivity turn out to be strong.

    The main technology parametric

    Technical measures: Micro modulation and demodulation of active a ctive infrared

    Recommended installation height: Center 0.3 m from the ground

    Half-angle of beam deviation:

    Detection mode: the feet instead of the hand, beam is truncated and output a signal

     to open door when it is touched.

    Reaction time: relay output 45ms

    Supply power: AC/DC 12~36V

    Total power consumption: 82mA

    Monitor signal: 4.5S MA

    Signal direction: Effective control on the radio, the red light is lit, the green light flashes .

    when the beam is truncated.

    Environment temperature: -20¡æ~+55¡æ

    Immunity: Sunlight 81000LUX

    Grilled white light: 36000LUX

    Electronic Microwave: Consistent with 89/336/CEE criteria

    Appearance dimensions ; 123(L)x50(W)x32(H)mm  (Main controller)

    19mmx13mm(Light eyes )

    186mmx175mmX53mm(Main shell)

    Output signal: relay output by the passive cable contact

    M-219   Feet sensor  switch