• Homepage>>access control system
    New productsProducts series
    M212D Electric Bolt (Delay time)

    With the access control system can be installed on  glass doors, wooden doors, steel doors, fire doors.
    Working power: DC12V Holding Current: 110mA Delay Time: 0S, 6S, 9S working current: 800mA
    Installation hole size: 212 (length) * 35 (W) within the pit depth is not less than 43MM Panel Size: 205 (length) * 34 (W) * 0.8 (D) mm
    Compact  firm  structural design, has a strong anti-sliding shocks. Design of ultra-low temperature, long service life. 0-9 second adjustable delay time.

    M212D Electric Bolt (Delay time)
    M212D Electric Bolt (Delay time)
    • CAD diagram
    • Diagram1CADdownload
    • Manual book
    • M212D Electric Bolt (Delay time)PDFdownload
    • Manual book
    • M212D Electric Bolt (Delay time)PDFdownload
    Detailed Products
    Electric bolt(delay time)212D
    With the access control system can be installed on  glass doors, wooden doors, steel doors, fire doors.
    Working power: DC12V Holding Current: 110mA Delay Time: 0S, 6S, 9S working current: 800mA
    Installation hole size: 212 (length) * 35 (W) within the pit depth is not less than 43MM Panel Size: 205 (length) * 34 (W) * 0.8 (D) mm
    Compact  firm  structural design, has a strong anti-sliding shocks. Design of ultra-low temperature, long service life. 0-9 second adjustable delay time.
    The product application
    The product workswith the accesscontroller to controlthe door.Be fixed 
    on glass doors,woodendoors, iron gateand fireproof doors.
    11Function
    E. Adjust the time-delay adjusterto control thedoor open for0s,3s, 6s and9s. 
    F. Installation(As the chart5shown): 
    This product iswith fail-safe designwhich operate withDC12V.4 voltage.Easy to 
    set the delaytime according tothe needs ofuser, which can avoid 
    the door lockedbefore people enteringin.

    22Instruction 
    A. 
    Please readthis instruction andcheck the accessoriesquantities before 
    using. 
    B. Twomain parts includes:(1)magneticbase (2) mainbody. Thegap between 
    the magnetic baseand main body should be lessthan 3mm wheninstall the lock. 
    The hole mustbe fixed rightto the lockcore bounce.As theChart 1 shown. 
    C. 8-pin wire 
    for connection( red,black ,blue,white,yellow,green gray and 
    orange). 
    D. Circuit connection(chart4):thevoltage for thelock must reachto DC12V. 
    Hole
    Main body

    Magnet 
    Magnetic base 
    Lock core bounce (Chart1) 
    Connecting wire
    White(COM)
    Yellow(NC)
    Yellow(NO)
    Lock core bouncesensor 
    (Chart2A)
    Gray(COM)
    Orange(NC)
    Green(NO)
    Door sensor 
    (Chart2B)

    33Specification 
    Voltage: DC12V,0.8AMP 
    Red wire:postive(+) connection 
    Black wire :negative(-)connection 
    Action current:start0.9A,standby 0.09A 
    Delay time :0-9s adjustable 
    Size of decorationfaceplate:210mm

    42mm 
    0.8mmD 
    Size of faceplate:200mm 
    34mm 
    3mmD 
    Size of magneticbase:90mm 
    24mm 
    3mmD 
    Accessory: 
    extending bracket(2pcs) 
    magnetic base (1pcs) installing bracket(1pcs) 
    M5

    10mmL screw(4pcs) 
    M4
    10mmL screw(4pcs)

    1 Please keep it awayform the moistplace and water. 
    Time-delay adjuster 2 The voltageof power supplyshould be upto DC12V orDC-12.8V. 
    3 The sizeof faceplate is 200mm long asstandard configuration.
    0S3S 6S 9S

    (Chart3)
    Electric lock 
    Controling machine
    or access control

    Switch 
    220V/50HZ
    +12V

    Red
    Regulated (-
    )
    power Black
    Sensoring wires
    (Chart4)
    44Note

    Packaging Details

    Unit Type:
    piece
    Package Weight:
    1.000kg (2.20lb.)
    Package Size:
    16cm x 5cm x 4cm (6.30in x 1.97in x 1.57in)