打印
M212D Electric Bolt (Delay time)

With the access control system can be installed on  glass doors, wooden doors, steel doors, fire doors.
Working power: DC12V Holding Current: 110mA Delay Time: 0S, 6S, 9S working current: 800mA
Installation hole size: 212 (length) * 35 (W) within the pit depth is not less than 43MM Panel Size: 205 (length) * 34 (W) * 0.8 (D) mm
Compact  firm  structural design, has a strong anti-sliding shocks. Design of ultra-low temperature, long service life. 0-9 second adjustable delay time.

Details
Electric bolt(delay time)212D
With the access control system can be installed on  glass doors, wooden doors, steel doors, fire doors.
Working power: DC12V Holding Current: 110mA Delay Time: 0S, 6S, 9S working current: 800mA
Installation hole size: 212 (length) * 35 (W) within the pit depth is not less than 43MM Panel Size: 205 (length) * 34 (W) * 0.8 (D) mm
Compact  firm  structural design, has a strong anti-sliding shocks. Design of ultra-low temperature, long service life. 0-9 second adjustable delay time.
The product application
The product workswith the accesscontroller to controlthe door.Be fixed 
on glass doors,woodendoors, iron gateand fireproof doors.
11Function
E. Adjust the time-delay adjusterto control thedoor open for0s,3s, 6s and9s. 
F. Installation(As the chart5shown): 
This product iswith fail-safe designwhich operate withDC12V.4 voltage.Easy to 
set the delaytime according tothe needs ofuser, which can avoid 
the door lockedbefore people enteringin.

22Instruction 
A. 
Please readthis instruction andcheck the accessoriesquantities before 
using. 
B. Twomain parts includes:(1)magneticbase (2) mainbody. Thegap between 
the magnetic baseand main body should be lessthan 3mm wheninstall the lock. 
The hole mustbe fixed rightto the lockcore bounce.As theChart 1 shown. 
C. 8-pin wire 
for connection( red,black ,blue,white,yellow,green gray and 
orange). 
D. Circuit connection(chart4):thevoltage for thelock must reachto DC12V. 
Hole
Main body

Magnet 
Magnetic base 
Lock core bounce (Chart1) 
Connecting wire
White(COM)
Yellow(NC)
Yellow(NO)
Lock core bouncesensor 
(Chart2A)
Gray(COM)
Orange(NC)
Green(NO)
Door sensor 
(Chart2B)

33Specification 
Voltage: DC12V,0.8AMP 
Red wire:postive(+) connection 
Black wire :negative(-)connection 
Action current:start0.9A,standby 0.09A 
Delay time :0-9s adjustable 
Size of decorationfaceplate:210mm

42mm 
0.8mmD 
Size of faceplate:200mm 
34mm 
3mmD 
Size of magneticbase:90mm 
24mm 
3mmD 
Accessory: 
extending bracket(2pcs) 
magnetic base (1pcs) installing bracket(1pcs) 
M5

10mmL screw(4pcs) 
M4
10mmL screw(4pcs)

1 Please keep it awayform the moistplace and water. 
Time-delay adjuster 2 The voltageof power supplyshould be upto DC12V orDC-12.8V. 
3 The sizeof faceplate is 200mm long asstandard configuration.
0S3S 6S 9S

(Chart3)
Electric lock 
Controling machine
or access control

Switch 
220V/50HZ
+12V

Red
Regulated (-
)
power Black
Sensoring wires
(Chart4)
44Note

Packaging Details

Unit Type:
piece
Package Weight:
1.000kg (2.20lb.)
Package Size:
16cm x 5cm x 4cm (6.30in x 1.97in x 1.57in)