打印
M206 password with card reader passwords

One Safety instructions

Thank  for purchasing this product, in order to use the product properly ,please read this operations guide before using.

Two  An entrance guard controller body machine initialization method:

 

Details

206 PASSWORD ACCESS WITH CARD READER

 

One Safety instructions

Thank  for purchasing this product, in order to use the product properly ,please read this operations guide before using.

Two  An entrance guard controller body machine initialization method:
1.closes the power source, the S16 2nd foot and the 3rd foot docking.
 
2.puts through the power source, the buzzer continues to resound continuously reports to the police, red candle, green light, orange lamp uneven twinkle.
 
3.The power failure, puts through the power source again, the red candle, the green light, the orange lamp uneven twinkle. Waits for the S16 transformation.
 
4.S16 2, 3 foot separations, 1, 2 foot connection.
 
5.The entrance guard controller initialization completes, the peak calls resounds, the entrance guard controller enters the user running condition.

 

Explanation: The initialization operation only repairs a body machine system password, for the default password 12345 (i.e. for exwork default password), other data cannot delete.
 
Third  relay output establishment method:
1.PUSH 1 relay for dry contact output.
 
2.(When J1 NO foot connection, PUSH 1, GND Chang Kai relay operation, PUSH 1, GND connection).
 
3.(When J1 NC foot connection, PUSH 1, GND Chang Bi relay operation, PUSH 1, GND separation).
 
4.J2 is the height level choice.
Fourth an entrance guard body machine programming method:
1.“#” Key: The functional key, enters the programming pattern

 

(1) presses  #; the key, the red candle, the green light, the orange lamp glistens together.

 

(2) inputs 5 system passwords (12345), the buzzer resounds, the red candle and the orange lamp bright, the green light extinguishment, an entrance guard body machine enters the system programming condition.
 
2 “#” key, revision system password:
(1) presses“#”the key, the orange lamp bright, the red candle and the green light extinguishment.
 
(2)The user inputs 5 numerical ciphers (for example: 88888), the input finished, the buzzer resounds short, the green light glistens an extinguishment, the orange lamp and the red candle glistens, the password revises successfully.

 

Attention: This system user password must preserve properly, enters when once more the system programming pattern needs to input this system password; If forgets the password, please carry out the initialization operation flow, system administration password initial for exwork default password 12345.

 

3 “#” the key, the increase (revision) the user opens the door the password (this password for public password)
According to“#” inputs four figure users to open the door the password (for example: 8888)
Fifth he establishment opens the door the way:
According to “301”: The card or the password open the door
According to “302”: The card adds the password to open the door
 
Sixth authorized user card:
Note: The card number is refers to in the ID card silk India's 10 card number behind 8 (front to be possible to abbreviate for zero)
(1)     Manual joins:
The single sheet joins: Enters 8 figure card number +# according to 40+# (to be possible to input continuously, according to # conclusion)
       The batch join: Enters 8 figure outset card number +# according to 50+#, again enters the number of sheets which wants to increase (three figures) +# (this function only to be restricted in user card number to be possible continuously)

 

Reads the card to join:
The single sheet joins: Reads according to 41+# must give the board card +# (to be possible to read card continuously, according to # conclusion)
       The batch join: Reads the card according to 51+# (outset card), enters card number of sheets which wants to increase (three figures) +#

 

Seventh deletion user card:
(1) manual deletion:
Single sheet deletion: Enters 8 figure card number +# according to 60+# (to be possible to input continuously, according to # conclusion)
Batch deletion: Enters 8 figure outset card number +# according to 70+# to enter again wants to increase the card the number of sheets (three figures) +#
 
(2) reads the card deletion:
Single sheet deletion: Reads card +# according to 61+# which must delete (to be possible to read card continuously, according to # conclusion)
Batch deletion: Reads the card according to 71+# (outset card), enters card number of sheets which wants to delete (three figures) +#

 

Note: When does altogether card increases or the deletion, enters wants to increase or the deletion card number of sheets (3 numerals), does not contain the outset card or 8 figure outset card number, therefore the actual card number of sheets should be 3 numerals +1
Eighth eletion all user card:
According to “888#”, buzzer Changming, the green light glistens an extinguishment, the orange lamp and the red candle is bright, all user data deletes successfully.
Ninth evision opening the door time:
(1) presses “0” brightly the key, the orange lamp, the red candle, the green light extinguishment.
(2) inputs two opening the door time value (for example 05 is 5 seconds), buzzer Changming, the green light glistens an extinguishment, the orange lamp and the red candle is bright, the opening the door time establishes successfully.
 
Tenth, withdrawal programming:
According to “*” withdrawal programming condition
 
11th, an entrance guard body machine application method
After an entrance guard body machine programming completes, enters the normal work running condition, the red candle is bright, green light and orange lamp extinguishment.

 

The application method is as follows:
Or inputs 4 user passwords continuously a user card close entrance guard body machine, the buzzer long resounds, the green light is bright, the red candle extinguishment, opens the door successfully, opens the door in the time in the hypothesis, the lamp instruction condition is invariable.
 
If the buzzer resounds short three, the red candle glistens continuously three times, then expressed this card or the password are the illegal users, cannot open the door.
 
If some user for the card + password, the request is reading after correctly the card, if is the effective card, then the buzzer long resounds, the green light flashes, prompts the user to input the password immediately; If is the invalid card, then the withdrawal waiting reads other cards again.

 206WIRING A.jpg

Attention: A this entrance guard body machine simultaneously supports the card to open the door, the password opens the door, reads the card to open the door the way in the password three kinds.
  In opens the door under the condition not to be able to read the card, in the pressed key user password input process, cannot simultaneously read the card operation.

M-206 Single access controller

Packaging Details

Unit Type:
piece
Package Weight:
0.300kg (0.66lb.)
Package Size:
12cm x 12cm x 21cm (4.72in x 4.72in x 8.27in)