Specification:
1、 product name: down insert CPU coin comparator
2、model number:060
3. accept coin size: 18mm -31 in diameter. 1.2mm -3.1mm in thickness
4. work voltage: DC+12 v ± 20%. Quiescent current below40mA. Dynamic current below 400Ma.
5. temperature: -10 ℃ …+ 60 ℃ .
Feature:
• select coins by material, diameter and thickness. Specially designed to prevent every kind of cheating and false-coin .
• with the output of three speeds pulse-width(20ms,40ms, 60ms ) and open collector. can chose positive pulse or negative one.
• software guard system and CPU recognize system make it reliable and safe to prevent opportunistic behavior.
• allow for connecting to counter.
• it is convenient for vending machine and gift machine use with input line of stop receive signal.
The coin selector can be applied to vending machine ,gaming machine, jukebox, coinbox, cyber café, and like.
Specification:
Working voltage: DC 12v ＋ 20%
Coin diameter: 18 mm-31mm
Coin thickness: 1.2mm-3.0mm
Working temperature: -15℃-75℃

Installation :
Remove coin and replace your coin to sampling clamp.
Select correct mode between normal .open(N.O)&Normal close (N.C)and solder one of them for coin signal.
With your machine switch to correct speed(pulse )of coin acceptance.
22ms-short pulse signal
50ms-medium pulse signal
100ms-long pulse signal
VR tuning for sensivity of coin acceptance. Turn clockwise(+) for strict coin selecting &anti-clockwise(-) for slack.
Lines guide of connector:
White line---normal close(N.C)
Green line---normal open(N.o)
Gray line----counter meter
Yellow line----inhibit input
Red line---power/DC12v
Black line ---GND(ground)